ACCURATE    TEMPERATURE       CONTROL          CORPORATION PLASTICS INDUSTRY THERMOCOUPLES FIVE TERMINAL JACK PANELS (FOR USE TO 900o F) Bayonet Compression Fitting Five Terminal Jack Panels Nozzle Adjustable MgO Miniature and MgO Insulation Accessories Base Metal Wire The inserts are used in groups of five. These are the same inserts as used in the jacks. Six standard thermocouple alloy types are available. Panels are supplied with all five positions for the same type of thermocouple. The body is made of phenolic and drilled for flush mounting. It may be mounted on a control panel or to a conduit box. Each conneciton is identified as to thermocouple type by etched aluminum discs on panel face. Connections are made to large terminal screws on the rear of the panel. For more than five connections comvine with other jack panels for each multiple of five. CATALOG NUMBER CALIBRATION 3520 (J) Iron/ Constantan 3522 (K) Chromel/ Alumel 3524 (R) or (S) Plat./Plat. & Rhodium 3526 (T) Copper/ Constantan   ADJUSTABLE THERMOCOUPLES RIGID MODEL: Plain end 1/8" O.D. Thermocouples for Adjustable Bayonet Fitting. BEND CATALOG NUMBER STRAIGHT 1504 450 1506 900 1508 Adjustable bayonet No. 1501 converts the plain 1/8" O.D. thermocouple to rigid adjustable bayonet thermocouple. Permits stocking one "A" dimension to suit several hole depths. Order plain 1/8" O.D. thermocouple and No. 1501 fitting separately. Specify "A" and "B" dimension for thermocouple MELT THERMOCOUPLES Used to seal hole if thermocouple is removed from extruder. RIGID BODY 4" FLEXIBLE ARMOR BLANK BOLT CONSTRUCTION Flush 1/4" 1/2" 3/4" Flush 1/4" 1/2" 3/4" IMMERSION LENGTH "A" 1431 1433 1434 1435 1436 1437 1438 1439 BODY LENGTH 3"      "L" 1461 1462 1463 1464 1465 1466 1467 1468 1469 BODY LENGTH 6"      "L" RECOMMENDED DRILLING DIMENSIONS FOR PROPER MOUNTING IN EXTRUDER NOTE: Melt Thermocouple uses 24 ga. thermocouple element and threads are 1/2-20 NF calibration is ISA standard grade Iron/Constantan, others available on request.